Environmental Simulation High and Low Temperature Impact Test Chamber for Material Testing

• Power Supply: 380V
• Certification: TUV, ISO
• Warranty: 1 Year
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ZC-LR150
• Inner Box: 150L
• Inner Chamber Material: SUS304 Stainless Steel
• Temperature Range: -70ºC~+150ºC
• Cooling Method: Water-Cooled
• Safety: Overhead Protection\Overcurrent Protection
• Applicable Scope: Battery\Electronics\New Energy\Plastic Material
• Tyle: Thermal Shock Chamber
• Temperature Control Method: Pid Control
• Transport Package: Wooden Box
• Specification: 150L
• Trademark: ZhiCheng
• Origin: Guangdong Dongguan
• Production Capacity: 1000 Set/Year

Product Description

Product Description

Cold and hot shock test chamber:
The cold and hot shock test chamber is a testing equipment that simulates the performance of products in extreme temperature environments. It can quickly change the temperature inside the test chamber and conduct cold and hot shock tests on products to evaluate their reliability and stability in temperature changing environments. Widely used in fields such as electronics, automobiles, aerospace, and military industry.
The working principle of the test chamber is to achieve rapid temperature changes by controlling the cooling and heating systems. The interior of the test chamber is usually divided into three areas: high temperature zone, low temperature zone, and test zone. The experimental area is the area for product placement and testing, while the high-temperature and low-temperature areas are controlled by the condenser and heater. When the product is tested in a test chamber, the test area undergoes rapid temperature changes, from extreme cold to extreme heat, and then from hot to cold, repeatedly simulating the challenge of extreme temperatures in the real environment.
 

Product Parameters

The main characteristics of the cold and hot shock test chamber are:
Widely applicable in fields such as electronics, automotive, aerospace, chemical, medical, etc;
The temperature control system is advanced and can achieve rapid temperature changes and accurate temperature control;
The internal structure of the test box is designed reasonably, with good sealing and circulation system, ensuring the uniformity of temperature changes and the accuracy of test results;
Equipped with an intelligent data acquisition system that can monitor and record temperature changes and test data in real-time during the testing process, providing reliable test results.
The main technical parameters include internal and external dimensions, preheating temperature range, cooling speed, etc. These parameters may vary depending on the model

Name	Cold and Hot Shock Test Chamber
Model Numbers	ZC-TH50	ZC-TH80	ZC-TH150	ZC-TH225
Cooling Method	Air cooling/water cooling	Air cooling/water cooling	Water cooling	Water cooling
Inner box size(W*H*D mm)	350*400*350	400*500*400	500*600*500	500*750*600
Box Structure	The two box model,moves up and down, left and right through a hanging basket, and the tested product is dynamic
High Temperature Setting	+60ºC~+150ºC
Low Temperature setting	-40ºC~-10ºC                                                             -55ºC~-10ºC                                                        -60ºC~-10ºC
High temperature tank temperature setting range	+60ºC~+200ºC
Low temperature tank temperature setting range	-60ºC~-10ºC                                                              -70ºC~-10ºC                                                        -70ºC~-10ºC
Impact recovery time	-60ºC~+150ºC about 5min
Temperature fluctuation	±0.5ºC
Temperature deviation	≤±2ºC
Compressor/Refrigerant	Imported compressors from France Taikang, Germany Bizel, and Germany Blog; R404a/R23 environmentally friendly refrigerant
Material of inner and outer boxes	Inner box: SUS304 stainless steel; Outer box: high-strength cold-rolled steel double-sided electrostatic resin high-temperature baking paint or SUS304 stainless steel
Thermal insulation materials	High temperature resistant and high-strength PU polyurethane foam insulation material, ultra-fine glass fiber
Protective devices	Machine leakage protection switch, compressor overload protection, refrigerant high voltage protection, temperature and humidity air incineration protection, phase sequence protection, fault alarm system
Control system	PID balanced temperature and humidity control system, with options for constant value testing and program testing
Power supply	3Ф380VAC+10% three-phase five wire 50/60Hz
Power	Depending on low temperature and volume

Standard Compliance

>>GB/T2423.1-2008 (IEC60068-2-1:2007) Test Ab: Low temperature
>>GB/T2423.2-2008 (IEC60068-2-2:2007) Test Bb: High temperature
>>GB/T2423.2-2012 (IEC60068-2-14:2009) Test Na: Temperature variation
>>GJB 150.5A-2009 Temperature Impact Test
>>GB/2424.13-2002 Temperature shock test
>>GJB 360B-2009 Temperature Shock Test
 

Applicable Industries

The application range of cold and hot shock test chambers is very wide, including electronic and electrical, automotive, chemical, medical, textile, aerospace and other fields. By conducting performance tests on product components and materials under high and low temperature changes, various performance indicators can be evaluated, providing important references for product development and quality control.

 

Style Selection

We provide various types of test chambers to meet the needs of different industries and application scenarios. The ordinary constant temperature and humidity test chamber is suitable for a wide range of industries, used to simulate various temperature and humidity environments to test the stability of products. The explosion-proof constant temperature and humidity test box is specially designed for safety testing of flammable and explosive products. The walk-in constant temperature and humidity test chamber is suitable for testing large products or the entire production line, with spacious internal space and high customizability. Finally, the cold and hot shock test chamber can simulate extreme temperature changes to test the performance of the product under rapid temperature changes. These test chambers each have their own characteristics, providing flexible and reliable solutions for various testing and research and development needs.

          Two box cold and hot shock test chamber         Three box cold and hot shock test chamber             Explosion proof temperature chamber

Ordinary constant temperature and humidity test chamber                   Walk-in constant temperature and humidity testing room

Detailed Photos

Company Profile

Zhicheng Testing Instrument
Quality Achieves Future Testing Achievements Achieve Success

Zhicheng Instrument Co., Ltd. is located in Dongguan City, Guangdong Hong Kong Macao Greater Bay Area. It is a high-tech enterprise that integrates research and development, production, sales, and service. Since its establishment, the company has been committed to the research and development of environmental testing, optical testing, and mechanical testing instruments and equipment. It has launched high-performance and modern intelligent testing equipment that meets the needs of industries such as aviation, wire, electronics, electricians, toys, hardware, paper products, batteries, optical optoelectronics, and scientific research. The company meets the needs of customers with advanced processing equipment, exquisite manufacturing technology, strict management system, and strong technical strength.