150L Small Constant Temperature and Humidity Test Chamber for Dual 85 Testing

• Customization: Available
• Power Supply: 220V|380V
• Certification: TUV, ISO
• Model NO.: ZC-TH80
• Warranty: 1 Year
• Model No.: Environmental Chamber
• Inner Box: 80L\150L\225L\408L\1000L
• Inner Chamber Material: SUS304 Stainless Steel
• Temperature Range: -40ºC~+150ºC
• Humidity Range: 10%~98%Rh
• Safety: Overhead Protection\Overcurrent Protection
• Applicable Scope: Battery\Electronics\New Energy\Plastic Material
• Tyle: Temperature Humidity Chamber
• Transport Package: Wooden Box
• Specification: 80L
• Trademark: ZhiCheng
• Origin: Guangdong Dongguan
• Production Capacity: 1000 Set/Year
• Package Size: 100.00cm * 170.00cm * 170.00cm
• Package Gross Weight: 150.000kg

Product Description

Product Description

Constant temperature and humidity test chamber:
The constant temperature and humidity test chamber is a device used to test the performance of materials in various environments. It can simulate and control specific temperature and humidity conditions to test the heat resistance, cold resistance, dry resistance, and moisture resistance of materials.
There are various names for constant temperature and humidity test chambers, including but not limited to constant temperature and humidity test machines, constant temperature and humidity test chambers, programmable humidity and heat alternating test chambers, constant temperature machine, constant temperature and humidity test chamber, high and low temperature humidity and heat test chamber, high and low temperature alternating humidity and heat test machine, humidity and heat aging test chamber, environmental reliability test chamber, high and low temperature humidity and heat cycle test chamber, temperature and humidity test chamber, humidity and heat aging test chamber, etc.
 

Product Parameters

 

Model Numbers	ZC-TH80	ZC-TH150	ZC-TH225	ZC-TH408	ZC-TH1000
Inner Box Dimensions(W*H*D mm)	500*400*400	500*600*500	500*750*600	800*850*600	1000*1000*1000
Outer Box Dimension(W*H*D mm)	730*1550*1530	780*1630*1590	850*1850*1650	1090*1940*1700	1290*2070*2050
Temperature Range	-20ºC~+150ºC                      -40ºC~+150ºC                      -70ºC~+150ºC
Heating Time	-20ºC↑100ºC for about 35 min           -40 ºC ↑100 ºC for about 45 min         -60ºC↑100ºC for about 55 min
Cooling Time	+20ºC↓-20ºC for about 45 min          +20 ºC ↓-40ºC for about 55 min         +20ºC↓-70ºC for about 90 min
Humidity Range	20%~98%RH(5%~98%RH Desiccator or dehumidifier required)
Temperature Uniformity	≤±2ºC(Measure the SENSOR placement point, 1/10 away from the inner dimension of the inner box wal)l
Temperature Fluctuation	±0.3ºC
Humidity Deviation	±3%RH (when the humidity is >50%RH) ±5%RH (when the humidity is ≤50%RH)
Material of Inner and Outer Boxes	Inner box: SUS304 stainless steel; Outer box: high-strength cold-rolled steel double-sided electrostatic resin high-temperature baking paint or SUS304 stainless steel
Thermal Insulation Materials	High temperature resistant and high-strength PU polyurethane foam insulation material, ultra-fine glass fiber
Protection Devices	Machine leakage protection switch, compressor overload protection, refrigerant high voltage protection, temperature and humidity air incineration protection, water shortage alarm protection, fault alarm system, phase sequence protection (limited to 380V power supply system)
Control System	PID balanced temperature and humidity control system, with the option of constant value test/program test
Refrigeration System	Original imported mechanical compressors (Taikang, Bizer, Gulun, Blog), heat sink evaporators
Cooling System	Air cooled or water-cooled, single stage compressor (+25°C~-40°C)/double stage compressor (-50°C~-70°C)
Power Supply	1Ф220VAC±10% OR 3Ф380V AC±10% 50/60Hz
Power	Depending on low temperature and volume

Standard Compliance

GB/T2423.2-89        High temperature test method Bb
GB2423.1-89          Test A: Low Temperature Test Method
IEC60068-2-1         Low temperature test method Ab
GJB150.4-1986        Low temperature test
EIA-364-59           Low temperature test
IEC60068-2-38        Temperature cycl
IEC60068-2-78        Constant heat and humidity
MIL-STD-202G-103B    Humidity testing
IEC60068-2-30        Moist heat temperature cycle
EIA-364-31C          Moisture resistance
GB/T2423.3           Constant Damp Heat Test Method
GJB150.4-86          Environmental test methods for equipment Low temperature test
GJB150.3-86          Environmental test methods for equipment High temperature test
GB/T2423.34-2005     Temperature and humidity combined cycle test method
GJB150.9-86          Environmental test methods for equipment-humid heat test

Applicable Industries

The constant temperature and humidity test chamber is an experimental equipment that can simulate and control specific temperature and humidity conditions. It is widely used in various industries such as electronics, electrical appliances, semiconductors, communication, instrumentation, scientific research, medical care, food, transportation, and automobiles. It can provide accurate environmental simulations for these industries, helping to test the performance and reliability of products under various extreme or specific temperature and humidity conditions, ensuring product quality and safety.

 

Style Selection

Our constant temperature and humidity test chamber adopts advanced temperature and humidity control technology to ensure a constant and accurate environment inside the chamber. In terms of styles, we have put in a lot of effort and provided a variety of specifications and configurations for you to choose from. From small portable to large-scale industrial grade, whether it's laboratory research or production line testing, we can provide you with the most suitable equipment. Here are some of our styles.

                                 Classic Style                                                          Latest Style                                                     Explosion Proof Style

                                  Black Style                                                                                                 Walk-in Style

Detailed Photos

Company Profile

Zhicheng Testing Instrument
Source manufacturer Quality assurance

Zhicheng Instrument Co., Ltd. is located in Dongguan City, Guangdong Hong Kong Macao Greater Bay Area. It is a high-tech enterprise that integrates research and development, production, sales, and service. Since its establishment, the company has been committed to the research and development of environmental testing, optical testing, and mechanical testing instruments and equipment. It has launched high-performance and modern intelligent testing equipment that meets the needs of industries such as aviation, wire, electronics, electricians, toys, hardware, paper products, batteries, optical optoelectronics, and scientific research. The company meets the needs of customers with advanced processing equipment, exquisite manufacturing technology, strict management system, and strong technical strength.